双向TVSarray Bidirectional TVSarray
Replacement parts are as follows:
USB50803C-A/TR7
USB50803C-A/TR13
USB50803C-Ae3/TR7
USB50803C-Ae3/TR13
Please note /TRxx = Tape and Reel size.
e3 = RoHS compliant.
This Transient Voltage Suppressor TVS array is packaged in an SO-8 configuration giving protection to 2 Bidirectional data or interface lines. It is designed for use in applications where very low capacitance protection is required at the board level from voltage transients caused by electrostatic discharge ESD as defined in IEC 61000-4-2, electrical fast transients EFT per IEC 61000-4-4 and effects of secondary lightning. It is also available with either Tin-Lead plated terminations or as RoHS Compliant with annealed matte-Tin finish by adding an “e3” suffix to the part number
-
.
-
. Using the schematic on the second page, pins 1 & 2 are tied together for the first protected line, and pins 7 & 8 are tied together to the ground. The same would then occur for a second protected line where pins 3 & 4 are tied together and pins 5 & 6 are tied together to the ground. These may also be switched in polarity connections since the electrical features are the same in each antiparallel opposite facing leg when the pins are tied together in this manner for bidirectional protection. These TVS arrays have a peak power rating of 500 watts for an 8/20 msec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, UNIVERSAL SERIAL BUS USB and I/O transceivers. The USB08XXC-A product provides board level protection from static electricity and other induced voltage surges that can damage or upset sensitive circuitry.