ADUC7121BBCZ-RL

ADUC7121BBCZ-RL概述

ARM微控制器 - MCU PRECISION ANALOG MCU I.C

Product Details

The ADuC7120/ADuC7121 are fully integrated, 12-bit, 1 MSPS, data acquisition systems incorporating a high performance multichannel ADC, 16-bit/32-bit microcontroller unit MCU, and Flash®/EE memory on a single chip.

The analog-to-digital converter ADC consists of eleven single-ended inputs for the ADuC7120 seven single-ended inputs for the ADuC7121 and two extra differential input pairs. The two differential input pairs can be routed through a programmable gain amplifier PGA. The ADC can operate in single-ended or differential input mode. The ADC input voltage is 0 V to VREF. A low drift band gap reference, temperature sensor, and voltage comparator complete the ADC peripheral set.

The ADuC7120/ADuC7121 provide five current output digital-to-analog converters DACs. The current sources five current DACs feature low noise and low drift, high-side current output at an 11-bit resolution. The five current digital-to-analog converters IDACs are as follows: IDAC0 with 250 mA full-scale FS output, IDAC1 with 200 mA FS output, IDAC2 with 45 mA FS output, IDAC3 with 80 mA FS output, and IDAC4 with 20 mA FS output.

The ADuC7120/ADuC7121 also contain up to 12 voltage output DACs. The DAC output range is programmable to one of three voltage ranges.

The devices operate from an on-chip oscillator and a phase-locked loop PLL generating an internal high frequency clock of 41.78 MHz UCLK. This clock is routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The microcontroller core is an ARM7TDMI®, 16-bit/32-bit reduced instruction set computer RISC machine, which offers up to 41 MIPS peak performance. 8 kB of SRAM and 126 kB of nonvolatile Flash/EE memory are provided on chip. The ARM7TDMI core views all memory and registers as a single linear array.

On-chip factory firmware supports in circuit serial download via the I2C serial interface port; nonintrusive emulation is also supported via the JTAG interface. These features are incorporated into a low cost QuickStart development system supporting this MicroConverter® family.

The devices operate from 3.0 V to 3.6 V, and they are specified over the −40°C to +105°C industrial temperature range. The IDACs are powered from a separate input power supply, PVDD. When operating at 41.78 MHz, the power dissipation is typically 120 mW. The ADuC7120/ADuC7121 are available in a 108-ball chip-scale package ball grid array [CSP_BGA].

**Applications**

.
Optical modules—tunable laser

### Features and Benefits

.
Analog input/output
.
Multiple channel, 12-bit, 1 MSPS ADC
.
2 differential pairs with input PGA
.
General-purpose inputs differential or single-ended
.
ADuC7121: 7 channels
.
Fully differential and single-ended modes
.
0 V to VREF analog input voltage range single-ended mode
.
5 low noise IDACs
.
250 mA, 200 mA, 45 mA, 80 mA, 20 mA
.
12-bit voltage output DACs
.
ADuC7121: 4 channels
.
4× 12-bit voltage output DACs
.
On-chip voltage reference
.
On-chip temperature sensor
.
Microcontroller
.
ARM7TDMI core, 16-bit/32-bit RISC architecture
.
JTAG port supports code download and debug
.
Clocking options
.
Trimmed on-chip oscillator ±3%
.
External watch crystal
.
External clock source up to 41.78 MHz
.
41.78 MHz PLL with programmable divider
.
Memory
.
126 kB Flash/EE memory, 8 kB SRAM
.
In-circuit download, JTAG-based debug
.
Software triggered in-circuit reprogrammability
.
On-chip peripherals
.
UART, 2 × I2C and SPI serial I/O
.
32-pin GPIO port
.
4× general-purpose timers
.
Wake-up timers and WDT
.
Power supply monitor
.
IDAC monitor
.
Temperature monitor
.
Vectored interrupt controller for FIQ and IRQ
.
8 priority levels for each interrupt type
.
Interrupt on edge or level external pin inputs
.
Power
.
Specified for 3 V operation
.
Normal mode: 11 mA at 5.22 MHz, 30 mA at 41.78 MHz
.
Packages and temperature range
.
7 mm × 7 mm 108-ball CSP_BGA
.
Fully specified for –40°C to +105°C operation
.
Tools
.
Low cost QuickStart development system
.
Full third party support
ADUC7121BBCZ-RL数据文档
型号 品牌 下载
ADUC7121BBCZ-RL

ADI 亚德诺

下载
ADUC845BSZ62-3

ADI 亚德诺

下载
ADUC847BSZ62-5

ADI 亚德诺

下载
ADUC7060BSTZ32

ADI 亚德诺

下载
ADUC7033BSTZ-88

ADI 亚德诺

下载
ADUC7023BCBZ62I-R7

ADI 亚德诺

下载
ADUCM320BBCZ

ADI 亚德诺

下载
ADUC7020BCPZ62I

ADI 亚德诺

下载
ADUC7021BCPZ32

ADI 亚德诺

下载
ADUC7021BCPZ62I

ADI 亚德诺

下载
ADUC7026BSTZ62

ADI 亚德诺

下载

锐单商城 - 一站式电子元器件采购平台