TL3474AIPWR

高转换率，单电源运算放大器 HIGH-SLEW-RATE,SINGLE-SUPPLY OPERATIONAL AMPLIFIERS

description/ordering information

Quality, low-cost, bipolar fabrication with innovative design concepts is employed for the TL3474, TL3474A operational amplifiers. These devices offer 4 MHz of gain-bandwidth product, 13-V/µs slew rate, and fast settling time without the use of JFET device technology. Although the TL3474 and TL3474A can be operated from split supplies, they are particularly suited for single-supply operation because the common-mode input voltage range includes ground potential VCC−. With a Darlington transistor input stage, these devices exhibit high input resistance, low input offset voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. These low-cost amplifiers are an alternative to the MC34074/A and MC33074/A operational amplifiers.

• Low Offset . . . 3 mV Max for A-Grade

• Wide Gain-Bandwidth Product . . . 4 MHz

• High Slew Rate . . . 13 V/µs

• Fast Settling Time . . . 1.1 µs to 0.1%

• Wide-Range Single-Supply Operation . . . 4 V to 36 V

• Wide Input Common-Mode Range Includes Ground VCC−

• Low Total Harmonic Distortion . . . 0.02%

• Large-Capacitance Drive Capability . . . 10,000 pF

• Output Short-Circuit Protection

• Alternative to MC33074/A and MC34074/A