125W 立体声数字放大器功率级
The is a third-generation, high-performance, integrated stereo digital amplifier power stage with improved protection system. The TAS5152 is capable of driving a 4- bridge-tied load BTL at up to 125 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation.
A low-cost, high-fidelity audio system can be built using a chipset, comprised of a modulator e.g., TAS5508 and the TAS5152. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. This device requires two power supplies, 12 V for GVDD and VDD, and 35 V for PVDD. The TAS5152 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 6 , which enables the use of smaller power supplies and heatsinks.
The TAS5152 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5152 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.
PurePath Digital and PowerPAD are trademarks of Texas Instruments.
Other trademarks are the property of their respective owners.
型号 | 品牌 | 下载 |
---|---|---|
TAS5152 | TI 德州仪器 | 下载 |
TAS5611PHD2EVM | TI 德州仪器 | 下载 |
TAS5612APHDR | TI 德州仪器 | 下载 |
TAS5612LADDV | TI 德州仪器 | 下载 |
TAS5613PHD2EVM | TI 德州仪器 | 下载 |
TAS5548EVM | TI 德州仪器 | 下载 |
TAS5707EVM | TI 德州仪器 | 下载 |
TAS5622ADDV | TI 德州仪器 | 下载 |
TAS5611APHDR | TI 德州仪器 | 下载 |
TAS5707PHP | TI 德州仪器 | 下载 |
TAS5711PHPEVM | TI 德州仪器 | 下载 |