LPC822M101JDH20J

NXP  LPC822M101JDH20J  微控制器, 32位, ARM 皮质-M0+, 30 MHz, 16 KB, 4 KB, 20 引脚, TSSOP

The is a 32-bit ARM Cortex-M0+ Microcontroller operating at CPU frequencies of up to 30MHz. The LPC82x support up to 32kB of flash memory and 8kB of SRAM. The peripheral complement of the LPC82x includes a CRC engine, four I²C-bus interfaces, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self-wake-up timer and state-configurable timer with PWM function SCTimer/PWM, a DMA, one 12-bit ADC and one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine and up to 29 general-purpose I/O pins. State configurable timer SCTimer/PWM with input and output functions including capture and match for timing and PWM applications. Each SCTimer/PWM input is multiplexed to allow selecting from several input sources such as pins, ADC interrupt or comparator output.

.

ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller NVIC CPU

.

System tick timer

.

AHB multilayer matrix

.

Serial wire debug SWD with four break points and two watch points

.

JTAG boundary scan BSDL supported

.

Up to 32kB on-chip flash programming memory with 64 byte page write and erase

.

Code Read Protection CRP supported

.

ROM API support boot loader, flash in-application programming IAP and in-system programming ISP

.

High-current source output driver 20mA on four pins

.

Switch matrix for flexible configuration of each I/O pin function

.

Analog peripherals - Comparator with four input pins and external or internal reference voltage

.

Serial peripherals - Two SPI controllers with pin functions assigned through the switch matrix

.

Clock generation - Crystal oscillator with an operating range of 1 to 25MHz

.

Power control - Integrated PMU power management unit to minimize power consumption

.

Unique device serial number for identification

ESD sensitive device, take proper precaution while handling the device.