OP413FSZ

ANALOG DEVICES  OP413FSZ  运算放大器, 四路, 3.4 MHz, 4个放大器, 1.2 V/µs, ± 2V 至 ± 18V, WSOIC, 16 引脚

The is a quad Operational Amplifier features low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but it cannot correct for temperature drifts and noise. Optimized for this parameter, the OPx13 family can be used to take advantage of superior analog performance combined with digital correction. The OPx13 family is unity gain stable and has a typical gain bandwidth product of 3.4MHz. Slew rate is in excess of 1V/µs. Noise density is a very low 4.7nV/√Hz and noise in the 0.1 to 10Hz band is 120nV p-p. Input offset voltage is guaranteed and offset drift is guaranteed to be less than 0.8µV/°C. Input common-mode range includes the negative supply and to within 1V of the positive supply over the full supply range. Phase reversal protection is designed into the OPx13 family for cases where input voltage range is exceeded.

.

Unity gain stable

.

No phase reversal

.

100µV Low offset voltage

.

0.2µV/°C Very low drift