DEM-OPA-SSOP-3A

Evaluation Board, Triple Operational Amplifier, SSOP 16 Package

The demonstration fixture is a generic, unpopulated printed circuit board PCB for high speed triple operational amplifiers in SSOP-16 packages with flow through pinout. This demo fixture is a two layer PCB and It uses a ground plane on the bottom, and signal and power traces on the top. The ground plane has been opened up around op amp pins sensitive to capacitive loading. Power supply traces are laid out to keep current loop areas to a minimum. The SMAor SMB connectors may be mounted either vertically or horizontally. The location and type of capacitors used for power-supply bypassing are crucial to high frequency amplifiers