2 x 1.5W BTL audio amplifier
GENERAL DESCRIPTION
The is a two channel audio power amplifier for an output power of 2×1.5 W with an 8Ωload at a 6 V supply. The circuit contains two Bridge-Tied Load BTL amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The TDA8542AT comes in a
20-pin SO package.
FEATURES
• Flexibility in use
• Few external components
• Low saturation voltage of output stage
• Gain can be fixed with external resistors
• Standby mode controlled by CMOS compatible levels
• Low standby current
• No switch-on/switch-off plops
• High supply voltage ripple rejection
• Protected against electrostatic discharge
• Outputs short-circuit safe to ground, VCC and across the load
• Thermally protected.
型号 | 品牌 | 下载 |
---|---|---|
TDA8542AT | Philips 飞利浦 | 下载 |
TDA8359J/N2,112 | NXP 恩智浦 | 下载 |
TDA8350Q/N6,112 | NXP 恩智浦 | 下载 |
TDA8356/N6,112 | NXP 恩智浦 | 下载 |
TDA8351/N6,112 | NXP 恩智浦 | 下载 |
TDA8026ET/C2,551 | NXP 恩智浦 | 下载 |
TDA8024T/C1 | NXP 恩智浦 | 下载 |
TDA8035HN/C1 | NXP 恩智浦 | 下载 |
TDA8034T/C1,118 | NXP 恩智浦 | 下载 |
TDA8002CG/C1,518 | NXP 恩智浦 | 下载 |
TDA8024TT/C1,118 | NXP 恩智浦 | 下载 |