IDT54FCT16374ATE

FAST CMOS 16位寄存器（三态） FAST CMOS 16-BIT REGISTER 3-STATE

DESCRIPTION:

The FCT16374T/AT/CT/ET and FCT162374T/AT/CT/ET 16-bit edge-triggered D-type registers are built using advanced dual metal CMOS technology. These high-speed, low-power registers are ideal for use as buffer registers for data synchronization and storage. The Output Enable xOE and clock xCLK controls are organized to operate each device as two 8-bit registers or one 16-bit register with common clock. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin.

The FCT16374T/AT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers.

The FCT162374T/AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times– reducing the need for external series terminating resistors. The FCT162374T/AT/CT/ET are plug-in replacements for the FCT16374T/AT/CT/ET and ABT16374 for on-board bus interface applications.

FEATURES:

• Common features:

   – 0.5 MICRON CMOS Technology

   – High-speed, low-power CMOS replacement for ABT functions

   – Typical tSKo Output Skew < 250ps

   – Low input and output leakage ≤1µA max.

   – ESD > 2000V per MIL-STD-883, Method 3015;

      > 200V using machine model C = 200pF, R = 0

   – Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP, 15.7 mil pitch TVSOP and 25 mil pitch Cerpack

   – Extended commercial range of -40°C to +85°C

   – VCC = 5V ±10%

• Features for FCT16374T/AT/CT/ET:

   – High drive outputs -32mA IOH, 64mA IOL

   – Power off disable outputs permit “live insertion”

   – Typical VOLP Output Ground Bounce < 1.0V at VCC = 5V, TA = 25°C

• Features for FCT162374T/AT/CT/ET:

   – Balanced Output Drivers: ±24mA commercial, ±16mA military

   – Reduced system switching noise

   – Typical VOLP Output Ground Bounce < 0.6V at VCC = 5V,TA = 25°C