MLS1206-4S4-601

FERROXCUBE  MLS1206-4S4-601  电感, 1206 600Z

The MLS series Multilayer Suppressor is a powerful solution for EMI/RFI attenuation for electronic equipment. Supplied in seven standard sizes 0402, 0603, 0805, 1206, 1210, 1806 and 1812, it has impedance between 6 and 2000R at 100MHz. When installed in series with signal or power circuits, high frequency noise is suppressed. There is no need for ground termination, which makes this device very suitable for circuits with difficult ground. Typical suppression frequencies range from 10 to 1000MHz and rated currents are between 0.1 and 6A. The multilayer suppressor is specially designed to reduce noise in low impedance circuits while keeping the signal free from distortion. This is because at the interfering frequencies these components behave as a resistor. The high frequency noise is converted into heat rather than reflected to the source. This dissipation prevents ringing and parasitic oscillations.

.

Absorption of generated noise

.

Filtering and wave-shape correction of digital signals from high speed clock oscillators

.

Prevention of high frequency interference entering circuit electronics

.

Monolithic structure for closed magnetic path and high reliability

.

High impedance per volume which leads to effective high density circuits

.

Superior physical properties

.

Suitable for wave and reflow soldering