MK60FN1M0VMD15

NXP  MK60FN1M0VMD15  微控制器, 32位, K6 以太网系列, ARM 皮质-M4, 150 MHz, 1 MB, 128 KB, 144 引脚, MAPBGA

The is a 32-bit Kinetis K6x Microcontroller with Ethernet crypto, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 150MHz. The device incorporates 1024kB internal flash, 128kB internal RAM, four 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, two I2C modules and two I2S modules.

.

ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

.

Serial programming interface EzPort

.

FlexBus external bus interface

.

NAND Flash controller interface

.

3 to 32MHz and 32kHz Crystal oscillator

.

Multi-purpose clock generator

.

Multiple low-power modes to provide power optimization based on application requirements

.

Memory protection unit with multi-master protection

.

32-channel DMA controller, supporting up to 128 request sources

.

External watchdog monitor and software watchdog

.

Low-leakage wakeup unit

.

Hardware CRC module to support fast cyclic redundancy checks

.

Hardware random-number generator

.

Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1 and SHA-256 algorithms

.

128-bit Unique identification ID number per chip

.

Low-power hardware touch sensor interface TSI

.

Programmable gain amplifier PGA up to x64 integrated into each ADC

.

Four analog comparators CMP containing a 6-bit DAC and programmable reference input

.

Programmable delay block

.

Two 8-channel Motor control/general purpose/PWM timers