ATSTK600-LCD160

LCD Touch Screens Development Tool

is a breakout board for a 160 segment LCD display. It is used together with the STK600 and an ATmega MCU w/ LCD driving capabilities. The STK600-LCD160 is connected to the STK600 through a set of 10 pin ribbon cables. The ATmega devices that only supports 100 segments can also be used, but with a reduced set of segments on the LCD. The STK600-LCD160 should then be connected to the STK600 through the four rightmost headers.

.

Board for a 160 segment LCD display

.

Used together with the STK600 and an ATmega MCU w/ LCD driving capabilities

.

The board is designed to easily connect to STK600 with flat cables

.

LCD module for testing with the megaAVR LCD Controller/driver

.

Can also be used for LCD enabled AVR XMEGA no SW drivers available