CPCL04GFC

Peizoresistive Sensor, Gage, 0Psi Min, 0.145Psi Max, 0-25mV, Square, Through Hole Mount

**Uncompensated/Compensated and Compensated Calibrated:** The CPX/CPXL and the CPC/CPCL Series sensors integrate silicon micro-machined sensing technology, temperature compensation and calibration in a complete family of low cost packages. This series offers the most cost-effective solution for design requirements. These piezo resistive pressure sensors use micro-machined silicon chips mounted on a ceramic and protected with a plastic cap. Several tube arrangements with nylon housings are available for various pressure applications. On devices of 5 PSI and above, the top side of the chip is protected against humidity by a Silgel coating. While the sensors are designed for use with non-corrosive, nonionic pressure media, they accommodate many gases that are used in medical applications. The CPC Series is designed for the lowest cost and smallest profile. The standard packages have only a plastic cap for OEM applications. The CPC axial port option accommodates pressure measurements in tube applications. **Features:**

* Small Size

* Temperature Compensated

* Zero and Span Calibrated

* Millivolt Output

* Differential, Gauge and Absolute Pressure

* Constant Voltage Excitation

* High Impedance — Low Current