AM-530/IR-450-EUR

BEHA-AMPROBE  AM-530/IR-450-EUR  数字万用表, 手持式, 自动/手动, 3.75位

The from Beha- is a true RMS electrical contractor multimeter with 3-in-1 pocket infrared thermometer, laser pointer and LED flashlight. This tough meters is designed to be a reliable, feature rich and rugged solution for taking critical measurements in residential, HVAC, electrical and industrial settings at breakthrough affordability. It performs microamps, diode test, continuity, capacitance, frequency, non-contact voltage measurement functions. The AM-530 measures and verifies presence of voltage in order to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections. The IR-450-EUR offers uniquely small and convenient form factor with professional 8:1 distance to spot ratio, high quality laser pointer & LED flashlight. The meter complies with IEC/EN 61010-1 3rd edition, IEC/EN 61010-2-030, UL61010-1, CAN/CSA-C22.2 number 61010.1-0.92, IEC/EN 61010-2-31 for test leads and EMC IEC/EN 61326-1 standards.

.

1mV to 600V AC voltage measurement range and 0.1mV to 600V DC voltage measurement range

.

0.1µA to 10A AC current measurement range and 0.1µA to 10A DC current measurement range

.

0.1ohm to 40Mohm resistance measurement range and 10pF to 4000µF capacitance measurement range

.

Safety rated to CAT III 600V and pollution degree 2

.

3999 digits display and input resistance of 10Mohm

.

Third hand probe holder and VoltTect non contact voltage detection

.

Autoranging, manual ranging, data hold, relative reading and max/min hold

.

Built-in flashlight to see wires in the darkness, 3999 digits display, backlight and bar graph

.

Fully featured multimeter of choice for professional electrical contractor

.

Dimension is 182mm x 90mm x 45mm and weight is 354g including battery

Disconnect test leads before opening case to avoid shock, injury or damage to the meter.

Do not place the test probe in parallel with circuit when the test leads are connected to current terminals.