15W 立体声数字放大器功率级
The TAS5102/ are integrated stereo digital amplifier power stages with an advanced protection system. The TAS5102/TAS5103 are capable of driving an 8-Ω bridge-tied load BTL at up to 20 W/15 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation.
A low-cost, high-fidelity audio system can be built using a chipset, comprising a modulator e.g., TAS5086 and the TAS5102/TAS5103. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. These devices require two power supplies, at 3.3 V for VREG, and up to 23 V for PVDD. The TAS5102/TAS5103 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 8 Ω, which enables the use of smaller power supplies and heatsinks.
The TAS5102/3 has an innovative protection system integrated on chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5102/TAS5103 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients.
型号 | 品牌 | 下载 |
---|---|---|
TAS5103 | TI 德州仪器 | 下载 |
TAS5611PHD2EVM | TI 德州仪器 | 下载 |
TAS5612APHDR | TI 德州仪器 | 下载 |
TAS5612LADDV | TI 德州仪器 | 下载 |
TAS5613PHD2EVM | TI 德州仪器 | 下载 |
TAS5548EVM | TI 德州仪器 | 下载 |
TAS5707EVM | TI 德州仪器 | 下载 |
TAS5622ADDV | TI 德州仪器 | 下载 |
TAS5611APHDR | TI 德州仪器 | 下载 |
TAS5707PHP | TI 德州仪器 | 下载 |
TAS5711PHPEVM | TI 德州仪器 | 下载 |