222603

工作站持续微型监测器小尺寸 70mm x 53mm，占用最小的工作表面积 安装在装置底部的两个 10mm 螺柱将监控器永久咬接嵌入到垫子上 使用可靠的波形失真技术：提供真正的 100% 连续监控 - 无虚假警报且无脉冲电流 需要单独出售的交流适配器 685-8760 需要单独出售的英式电源线 RS 262-1154 或欧式电源线 RS 311-9321

The Jewel® Workstation Continuous Mini Monitor independently monitors the operator and the working surface. The instant an operator"s wrist strap or cord fails, the continuous monitor will issue audible and visual alarms alerting the user of the problem. In the same manner, the unit also confirms that a path to ground of less than 500 megohms exists from the ESD working surface.

.

Creates a consistent connection and helps to prevent accidental disconnects with operator

.

Two 10mm studs installed on bottom of unit

.

Permanently snap monitor flush on mat

.

Two 10mm push and clinch sockets included

.

Easy installation on mat - no added wires

.

Stand-by 4mm and 10mm parking snap

.

Keeps unit from going into alarm when user disconnects cord

.

Real-time monitoring of ESD workstation including wrist strap, mat, and cords

.

Provided with calibration to European standards