PLC-RSP 系列，单刀双掷PLC-RSP 系列继电器模块包含带弹簧笼式连接的 PLC-BSP 基座端子块和带多层/电源触点的插入式继电器。 还提供 PLC 完整继电器模块，用于火车应用。用于安装在 DIN 导轨 NS 35/7.5 上 可使用 V 8适配器高效地连接至系统布线 功能插入式桥接 直流输入型号具有黄色 LED，用于显示工作电压、自由轮转二极管和极性反接二极管 交流输入型号具有黄色 LED 和桥式整流器 最大切换电压： | 250 V 直流/交流 ---|--- 限制连续电流： | 6 A 响应时间： | 5 ms，用于直流型号/6 ms，用于交流型号 释放时间： | 8 ms，用于直流型号/15 ms，用于交流型号 ### 接口继电器
PLC-RELAY Series: Terminal Block with Plug-in Relay or SSR
The PLC-RELAY is the only pluggable quarter inch terminal block, which accepts either a solid-state relay or an electro-mechanical relay. Using only one part number, you are able to order both the base terminal block and the pluggable relay as a single unit. The PLC-RELAY is also available with switching capacities up to 10 A at 250 VAC.
The PLC-RELAY now also available in both sensor and actuator versions. In these versions you can connect sensors and actuators to the base terminal blocks to eliminate costly wiring and additional output terminal blocks. The preceding variations are only a few of the possibilities that are available. There are now over 100 variations available in different configurations and ratings.
Electromechanical & Solid-State Relay
* Universal — Input or Output Application
* Input Specialist — Designed Specifically for 3 Wire Input Applications
* Output Specialist — Designed Specifically for 2 Wire Output Applications
* High Current / Inrush
Electromechanical Only
* 125 VDC Electro-Mechanical PLC Relays 3
* 5 VDC PLC Relay Base Terminal Block and Plug in Relays