DS26C31TMX/NOPB

TEXAS INSTRUMENTS  DS26C31TMX/NOPB  芯片, 差分线驱动器, RS422, SOIC-16

The is a quad CMOS tri-state differential Line Driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. It accepts TTL or CMOS input levels and translates these to RS-422 output levels. This part uses special output circuitry that enables the drivers to power-down without loading down the bus. It has enable and disable circuitry common to all four drivers. The DS26C31 is pin compatible to the AM26LS31 and the DS26LS31. All inputs are protected against damage due to electrostatic discharge by diodes to VCC and ground.

.

TTL input compatible

.

Outputs will not load line when VCC = 0V

.

Tri-state outputs for connection to system buses

.

Low quiescent current

.

6ns Typical propagation delay

.

0.5ns Typical output skew

.

Green product and no Sb/Br