TLV2372-Q1

汽车类 550uA/通道 3MHz 轨到轨输入/输出运算放大器

The TLV237x-Q1 devices are single-supply operational amplifiers providing rail-to-rail input and output capability. The TLV237x-Q1 takes the minimum operating supply voltage down to 2.7 V and up to 16 V over the extended automotive temperature range. Therefore, the wide voltage range can support both start-stop functionality and a connection directly to the typical 12-V battery. The rail-to-rail capabilities allow the device to maximize the output signal and avoid clipping.

The CMOS inputs enable high-impedance suitable for engine control units ECU, body control modules BCM, battery management systems BMS, and HEV/EV inverters. This also allows the user to draw a lower offset voltage and maintain low power consumption to help meet overall system needs for quiescent current such as in infotainment or cluster, HEV/EV, and powertrain.

Additionally, the TLV237x-Q1 family supports a high common-mode rail to the supply voltage. This feature sets no gain limitations and can support the input at any level without the concern for any phase reversal.

.

Qualified for Automotive Applications

.

AEC-Q100 Qualified With the Following Results:

.

Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range

.

Device HBM ESD Classification Level 2

.

Device CDM ESD Classification Level C4B

.

Rail-to-Rail Input and Output

.

Wide Bandwidth: 3 MHz

.

High Slew Rate: 2.4 V/µs

.

Supply Voltage Range: 2.7 V to 16 V

.

Supply Current: 550 µA/Channel

.

Input Noise Voltage: 39 nV/√Hz

.

Input Bias Current: 1 pA

.

Ultra-Small Packaging:

.

5-Pin SOT-23 TLV2371-Q1