AT90CAN128-16AU

ATMEL  AT90CAN128-16AU  微控制器, 8位, CAN 控制器, AT90CAN, 16 MHz, 128 KB, 4 KB, 64 引脚, TQFP

The is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 4kb EEPROM, 53 general purpose I/O lines, 32 general purpose working registers, CAN controller V2.0A/V2.0B compliant, real time counter, four flexible timer/counters with compare modes and PWM, two USARTs, byte oriented two-wire serial interface, an 8-channel 10-bit A/D converter with optional differential input stage with programmable gain, programmable watchdog timer with internal oscillator, SPI serial port, JTAG test interface IEEE 1149.1 compliant for on-chip debugging and five software selectable power saving modes. The device supports a throughput of 16 MIPS at 16MHz and operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

.

High-performance, Low-power AVR® 8-bit Microcontroller

.

Advanced RISC Architecture

.

Non-volatile Program and Data Memories

.

JTAG IEEE Standard 1149.1 Compliant Interface

.

CAN Controller 2.0A and 2.0B, ISO 16845 Certified

.

Programmable Watchdog Timer with On-chip Oscillator

.

8-bit Synchronous Timer/Counter-0

.

8-bit Asynchronous Timer/Counter-2

.

Dual 16-bit Synchronous Timer/Counters-1 and 3

.

8-channel, 10-bit SAR ADC

.

On-chip Analogue Comparator

.

Byte-oriented Two-wire Serial Interface

.

Dual Programmable Serial USART

.

Master/Slave SPI Serial Interface

.

Power-on Reset and Programmable Brown-out Detection

.

Internal Calibrated RC Oscillator

.

8 External Interrupt Sources

.

Idle, ADC Noise Reduction, Power-save, Power-down and Standby Sleep Modes

.

Software Selectable Clock Frequency

.

Global Pull-up Disable