PTH05000W

6A 输出 5V 输入的宽输出调节插拔电源模块

The PTH05000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints.

This series operates from an input voltage of 5-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 3.6 V. The output voltage of the is set within this range using a single resistor.

Operating features include an on/off inhibit, output voltage adjust trim, output current limit, and over-temperature protection.

For high efficiency these parts employ a synchronous rectifier output stage. An output pre-bias holdoff capability ensures that the output will not sink current during startup.

Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC.

Package options include both through-hole and surface mount configurations.

.

Up to 6-A Output Current

.

5-V Input Voltage

.

Wide-Output Voltage Adjust 0.9 V to 3.6 V

.

Efficiencies up to 94%

.

160 W/in³ Power Density

.

On/Off Inhibit

.

Under-Voltage Lockout

.

Output Current Limit

.

Pre-Bias Startup Capability

.

Over-Temperature Protection

.

Surface Mountable

.

Operating Temp: –40 to +85°C

.

Safety Agency Approvals Pending: UL 1950, CSA 22.2 950, EN60950 & VDE