RPA60-2415SFW/N

直流/直流转换器 隔离式板载, ITE, 1输出, 60 W, 15 V, 4 A

The from Recom Power is a RPA60-FW series 60W single output DC to DC converter with negative control function. This high power density converter has 4:1 wide input voltage range and industry standard 2"x1" case size. Despite its small size, the RPA60-FW converter is fully specified device with high efficiency, no minimum load, 1600VDC isolation, tight regulation and low ripple/noise figures. The trimmable output is fully protected against overtemperature, short circuits, overcurrent and overvoltage. The converter finds many uses in railway applications where board space is at a premium. It has LC internal input filter.

.

Input voltage range from 9VDC to 36VDC 24VDC nominal input voltage

.

Output voltage of 15VDC and output current of 4000mA

.

Input current of 2680mA

.

Efficiency of 93.3% and maximum capacitive load of 4000µF

.

Maximum line regulation of ±0.2% low line to high line

.

Load regulation of ±0.5%

.

Start-up time of 60ms power-up, CTRL ON/OFF and internal operating frequency of 330KHz

.

Ripple and noise of 100mVp-p and maximum output accuracy of ±1%

.

Minimum isolation resistance of 10Mohm and typical isolation capacitance of 2200pF

.

Maximum case temperature of 105°C