AF09-30-10-13

Contactor, AC-DC Operated, 9.5A, DIN Rail, 690V, 3PST-NO, 3Pole, 4kW

The from is a three pole block contactor with normally open NO contacts. This contactor is mainly used for controlling 3-phase motors, non inductive or slightly inductive loads. It includes an electronic coil interface accepting a wide control voltage and manages large control voltage variations. One coil can be used for different control voltages worldwide without any coil change. This contactor has built-in surge protection and do not require additional surge suppressors.

.

Rated operational voltage of 690V for main circuit

.

Rated frequency limits from 25Hz to 400Hz

.

Rated operational current of 25A at 690V AC-1, 9A at 380V/400V AC-3 and 3A at 400V/440V AC-15

.

Maximum breaking capacity of 250A at 440V and 106A at 690V

.

Rated insulation voltage of 600V according to UL/CSA standards

.

IP20 degree of protection

.

Ambient air temperature range from -25°C to 60°C close to contactor fitted with thermal O/L relay

.

Control voltage 0f 100VAC to 250VAC at 50Hz/60Hz

.

IEC 60947-1/60947-4-1, EN 60947-1/60947-4-1, UL 508, CSA C22.2, CCC, GOST and cUL approved

.

Rated operational power of 4KW at 380V to 400V AC-3