LP38853 3A快速响应高精度可调LDO线性稳压器与启用和软启动 LP38853 3A Fast-Response High-Accuracy Adjustable LDO Linear Regulator with Enable and Soft-Start
The LP38853 is a high-current, fast-response regulator that can maintain output voltage regulation with extremely low input-to-output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: VBIAS provides voltage to drive the gate of the NMOS power transistor; VIN is the input voltage which supplies power to the load. The use of an external bias rail allows the device to operate from ultra-low VIN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an NMOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of this device makes it suitable for use in powering DSP and microcontroller core voltages, and switch-mode power-supply post regulators. Dropout Voltage: 240 mV typical at 3-A load current Low Ground Pin Current: 10 mA typical at 3-A load currentSoft Start: Programmable soft-start time
型号 | 品牌 | 下载 |
---|---|---|
LP38853S-ADJ/NOPB | TI 德州仪器 | 下载 |
LP38692MP-ADJ | National Semiconductor 美国国家半导体 | 下载 |
LP38691DT-5.0 | National Semiconductor 美国国家半导体 | 下载 |
LP38691DT-3.3 | National Semiconductor 美国国家半导体 | 下载 |
LP38692MP-5.0 | National Semiconductor 美国国家半导体 | 下载 |
LP38693-ADJEV | TI 德州仪器 | 下载 |
LP38502SD-ADJEV | TI 德州仪器 | 下载 |
LP38502ATJ-EV | TI 德州仪器 | 下载 |
LP38692EVAL | TI 德州仪器 | 下载 |
LP38502ASD-EV | TI 德州仪器 | 下载 |
LP38512TS-1.8EV | TI 德州仪器 | 下载 |