STM8S103F3P3TR

STM8 系列 8 位 8 kB 闪存 1 KB RAM 16 MHz 微控制器 - TSSOP-20

The STM8S103F2/x3 access line 8-bit microcontrollers offer 8 Kbyte Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual RM0016 refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost.

Device performance and robustness are ensured by advanced core and peripherals made in a state-of-the art technology, a 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog and brown-out reset.

Full documentation is offered as well as a wide choice of development tools.

**Key Features**

.

Core

.

16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline

.

Extended instruction set

.

Memories

.

Program memory: 8 Kbyte Flash; data retention 20 years at 55 °C after 10 kcycle

.

Data memory: 640 byte true data EEPROM; endurance 300 kcycle

.

RAM: 1 Kbyte

.

Clock, reset and supply management

.

2.95 to 5.5 V operating voltage

.

Flexible clock control, 4 master clock sources

.

Low power crystal resonator oscillator

.

External clock input

.

Internal, user-trimmable 16 MHz RC

.

Internal low-power 128 kHz RC

.

Clock security system with clock monitor

.

Power management:

.

Low-power modes wait, active-halt, halt

.

Switch-off peripheral clocks individually

.

Permanently active, low-consumption power-on and power-down reset

.

Interrupt management

.

Nested interrupt controller with 32 interrupts

.

Up to 27 external interrupts on 6 vectors

.

Timers

.

Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

.

16-bit general purpose timer, with 3 CAPCOM channels IC, OC or PWM

.

8-bit basic timer with 8-bit prescaler

.

Auto wake-up timer

.

Window watchdog and independent watchdog timers

.

Communication interfaces

.

UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode

.

SPI interface up to 8 Mbit/s

.

I2C interface up to 400 kbit/s

.

Analog to digital converter ADC

.

10-bit, ±1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog

.

I/Os

.

Up to 28 I/Os on a 32-pin package including 21 high sink outputs

.

Highly robust I/O design, immune against current injection

.

Unique ID

.

96-bit unique key for each device