OM13082

通用子板, LPCXPRESSO/MAX

The is a LPC general purpose shield board has been designed to complement LPCXpresso MCU development boards by providing easy access to several commonly used peripherals. The LPC general purpose shield plugs into the top side expansion connectors of LPCXpresso V2, V3 and MAX boards. The LPCXpresso is a low cost development platform comprised of a simplified Eclipse based IDE and low cost target boards which include an attached JTAG debugger. LPCXpresso is an end to end solution enabling embedded engineers to develop their applications from initial evaluation to final production.

.

128 x 64 LCD dot matrix display connected via SPI

.

4 user LEDs and 5 position joystick controlled via an PCA9535BS I2C port expander

.

LM75D temperature sensor I2C

.

Bosch BMI160 inertial measurement unit 3 axis accelerometer and 3 axis gyroscope, I2C

.

SD/MMC card slot requires LPCXpresso V3 board with SDIO interface

.

Ethernet RJ45 connector and magnetics requires LPCXpresso V3 board with onboard PHY

.

CAN terminal block requires LPCXpresso V3 board with CAN interface

.

Micro USB B device connector requires LPCXpresso V3 board with USB support via expansion

.

Micro USB A/B connector V3 Board required

.

CAN terminal block V3 Board required