06001.0-00

Touch-Safe HeaterTouch-Safe heaters are designed for use in every application and area where enclosures and cases that house electrical / electronic components must be heated to avoid condensation and low temperatures. The aluminium heater body is covered with a plastic housing. This plastic housing enables the surface temperature to be significantly decreased in comparison to conventional aluminium heaters. With ever-increasing packing densities within panels and enclosures, this allows the gap between the heater and panel components to decrease. Some Touch-Safe models have an integrated thermostat.Operating voltage 120-240Vac/dc Min 110v , Max 265v Small size Self-regulating Double-insulated Quick DIN rail mounting Touch-safe screw terminals ### 认可VDE; UL### DIN 导轨安装机柜加热器加热器特别用于在控制和设备机柜中实现防凝结和霜冻保护。 所有类型都随附 DIN 导轨安装硬件。

The is a touch-safe Heater made of plastic. The CSF 060-series touch-safe heater for the use in enclosures with electrical/electronically components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heater is designed for permanent operation.

.

PTC resistor temperature limiting heating element

.

Vertical airflow air outlet up, connection on bottom fitting position

.

-40 to 70°C Operating temperature range

.

IP20 Protection rating

.

Low surface temperature

.

Integrated thermostat

.

Quick mounting due to clip fixing

.

Double insulated

.

Wide voltage range

.

Small size