110-A-111/02

110 系列 2 位置 3.5 mm 间距 16-30 AWG 螺丝 连接器 接线端子

Types 110P-111/-211 terminal blocks have been speciall designed to allow effective potting of PC boards when terminal block is mounted on PCB edge and wire clamping area is facing outside of the board.

-Header

-Double level rows on same level

110-P-211 is equipped with a poka-yoke feature on each end sidewall. This prevents incorrect misaligned plugging when utilized with 110-A series plugs. Internal features prevent backwards insertion.

Coding kepys 120-K are available to prevent the insertion of the wrong plug into a header. These are usually field inserted but can be factory installed if required. These coding keys are visible from the exterior, through slots in the header. Correct keying requires the removla of corresponding keying nibs from the 110-A plugs.