TMS5701114BPGEQQ1

TEXAS INSTRUMENTS  TMS5701114BPGEQQ1  微控制器, 32位, ARM 皮质-R4F, 160 MHz, 1 MB, 128 KB, 144 引脚, LQFP

The is a 32-bit high-performance automotive-grade RISC Flash Microcontroller for safety systems. The safety architecture includes dual CPUs in lockstep, CPU and memory BIST logic, ECC on both the flash and the data SRAM, parity on peripheral memories and loopback capability on peripheral I/Os. The device integrates the ARM Cortex-R4F floating-point CPU which offers an efficient 1.66 DMIPS/MHz and has configurations which can run up to 180MHz providing up to 298 DMIPS. The device supports the word-invariant big-endian [BE32] format. The TMS570LS1114 device has 1MB of integrated flash and 128kB of data RAM with single-bit error correction and double-bit error detection. The flash memory on this device is a non-volatile, electrically erasable and programmable memory, implemented with a 64-bit-wide data bus interface. The flash operates on a 3.3V supply input same level as I/O supply for all read, program and erase operations.

.

Dual CPUs running in lockstep

.

ECC on flash and RAM interfaces

.

Built-in self-test BIST for CPU and on-chip RAMs

.

Error signalling module with error pin

.

Voltage and clock monitoring

.

ARM Cortex-R4F 32-Bit RISC CPU - 1.66 DMIPS/MHz with 8-stage pipeline

.

FPU with single- and double-precision

.

12-Region memory protection unit MPU

.

Open architecture with third-party support

.

16-bit external memory interface EMIF

.

Consistent memory map across family

.

Real-time interrupt R timer OS timer

.

128-channel Vectored interrupt module VIM

.

2-channel Cyclic redundancy checker CRC

.

Direct memory access DMA controller - 16 channels and 32 control packets

.

Frequency-modulated phase-locked loop FMPLL with built-in slip detector

.

Separate no modulating PLL

.

IEEE 1149.1 JTAG, boundary scan and ARM coresight components

.

Advanced JTAG security module AJSM

.

Calibration Capabilities - parameter overlay module POM