2,5 MSFW 12

Minimodul Horizontal Locking HeadersThese Lumberg Minimodul™ horizontal locking pin headers mate with crimp contact housings 3114 Series, see stock number 737-8482 typical, for indirect mating of wire to board connections.### 2.5mm 线到板 - Lumberg Minimodul 系列这些 Lumberg Minimodul 连接器适合电缆到板连接。 Minimodul 系列连接器可使用成熟的压接技术轻松实现单导线和扁平电缆捆束，特别适合小批或中等批量生产。 Minimodul 系列连接器适合电流高达 5A 的信号和低负载。 节距 2.50 mm .098"。

Minimodul Horizontal Locking Headers

这些 Minimodul™ 水平锁定引脚针座与压接触点外壳（3114 系列）配用，请参见库存号 737-8482 典型，用于间接匹配的线到板连接。

欧时:
Lumberg PCB 针座 Minimodul 系列 12路 2.5mm节距 1排 直角 2,5 MSFW 12, 焊接端接, 5A, 通孔

艾睿:
Think of Lumberg&s;s shrouded 2,5 MSFW 12 header connector the next time you&s;re concerned about accidentally shorting out pins on your printed circuit. This HDR connector&s;s 12 contacts that are made out of brass and plated with tin over nickel. It has a right angle body orientation. This is a 1-row connector. Its pitch is 5 mm. It has a header type gender. It has a maximum voltage rating of 160 VAC. This device has a maximum current rating of 5 A. This product comes packaged in bulk, so the parts will be stored loosely. 2,5 MSFW 12 is housed in polyamide. It uses the solder termination method. This connector has an operating temperature of -40 to 120 °C. This product is 34.7 mm long, 7.5 mm tall and 24.75 mm deep.

Allied Electronics:
Minimodul locking 12w Pin header 1 row

Verical:
Conn Shrouded Header HDR 12 POS 5mm Solder RA Thru-Hole Bulk