INA168-Q1

汽车级、60V、高侧、电流输出电流分流监控器

The INA138-Q1 and INA1x8-Q1 are high-side, unidirectional, current sense amplifiers. Wide input common-mode voltage range, low quiescent current, and TSSOP and SOT-23 packaging enable use in a variety of applications.

Input common-mode and power-supply voltages are independent, and range from 2.7 V to 36 V for the INA138-Q1, and 2.7 V to 60 V for the INA168-Q1. Quiescent current is only 25 µA, which permits connecting the power supply to either side of the current-measurement shunt with minimal error.

The device converts a differential input voltage to a current output. This current is converted back to a voltage with an external load resistor that sets any gain from 1 to over 100. Although designed for current shunt measurement, the circuit invites creative applications in measurement and level shifting.

Both devices are available in a TSSOP-8 package. The INA168-Q1 is also available in a SOT-23-5 package. Both devices are specified for the –40°C to +125°C temperature range.

.

Qualified for Automotive Applications

.

AEC-Q100 Qualified With the Following Results:

.

Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature Range

.

Device HBM ESD Classification Level 2

.

Device CDM ESD Classification Level C6

.

Complete Unipolar High-Side Current-Measurement Circuit

.

Wide Supply and Common-Mode Ranges

.

INA138-Q1: 2.7 V to 36 V

.

INA168-Q1: 2.7 V to 60 V

.

Independent Supply and Input Common-Mode Voltages

.

Single Resistor Gain Set

.

Low Quiescent Current 25 µA Typical

.

Wide Temperature Range: –40°C to +125°C

.

Packages: TSSOP-8, SOT-23-5 INA168-Q1