8426-9

EPDM 橡胶管道主要的电气绝缘，用于所有额定电压高达 1000V 的实心电介质（橡胶和塑料）的绝缘导线和电缆接头 密封严密，即使在经过较长时间的老化和暴露之后，仍可保持其弹性和压力 简易安装，无需手电筒、供热或工具 接受各种电缆大小 提供物理保护和防潮密封，用于高电压、空气绝缘的连接器和接线片，如间隔电缆和接线片到母线的连接之类 耐潮、耐酸碱、耐臭氧和紫外线 直接可埋装或可淹没 厚壁，可抗穿孔和损坏 适合于室内、室外或高空使用 温度范围 -18 ° C 到 +90 ° C 尺寸 mm --- **库存号** | **密封管道最小直径** | **覆盖管道最大直径** | **已安装管道的近似长度** 251-7566 | 3 | 9.9 | 178 251-7572 | 9.9 | 17.8 | 178 251-7588 | 13 | 25.4 | 229 251-7601 | 17.5 | 33 | 305 251-7623 | 24.1 | 48.3 | 305 251-7645 | 32.5 | 63.5 | 457 ### 冷收缩套管

Cold Shrink™ Connector Insulators, 8420 Series, Polypropylene Material, 1400 PSI Tensile Strength

The 8420 series cold shrink connector insulators are open-ended, tubular, rubber sleeves that are factory expanded and assembled onto a removable plastic core. After the tube has been positioned for installation over an inline connection, coupling or termination, the core is removed allowing the tube to shrink and form a water-resistant seal.

Cold shrink connector insulators are open-ended, tubular, rubber sleeves which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, et