MCP79400-I/MS

MICROCHIP  MCP79400-I/MS  芯片, 实时时钟/日历, GP I2C, 64B SRAM, ID, 8MSOP

The is a low-power Real-time Clock RTC uses digital timing compensation for an accurate clock/calendar, a programmable output control for versatility, a power sense circuit that automatically switches to the backup supply and non-volatile memory for data storage. Using a 32.768kHz crystal, it tracks time using several internal registers. For communication, the MCP7940X uses the I²C™ bus. The clock/calendar automatically adjusts for months with fewer than 31 days, including corrections for leap years. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator and settable alarms to the second, minute, hour, day of the week, date or month. Along with the battery-backed SRAM memory, a 64-bit protected EEPROM space is available for unique ID or MAC address to be programmed at the factory or by the end user.

.

On-chip digital trimming/calibration - 1ppm Resolution

.

Dual alarm with single output

.

Programmable open-drain output control - CLKOUT with 4 selectable frequencies and alarm output

.

64-byte SRAM, battery backed

.

Automatic VCC switchover to VBAT backup supply

.

Power-fail time-stamp for battery switchover

.

Low-power CMOS technology

.

1 Million erase/write cycles for unique ID

.

64-bit Unique ID - User or factory programmable and protected EEPROM