TAS5352

125W 立体声数字放大器功率级

The is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4- bridge-tied load BTL at up to 125 W per channel with low harmonic distortion, low integrated noise, and low idle current.

The TAS5352 has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal PWM activity detector.

A power-on-reset POR circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.

.

Total Power Output Bridge Tied Load

.

2 × 125 W at 10% THD+N Into 4

.

Total Power Output Single Ended

.

4 × 45 W at 10% THD+N Into 3

.

Total Power Output Parallel Mode

.

1 × 250 W at 10% THD+N Into 2

.

>110 dB SNR A-Weighted With TAS5518 Modulator

.

<0.1% THD+N 1 W, 1 kHz

.

Supports PWM Frame Rates of 192 kHz to 432 kHz

.

Resistor-Programmable Current Limit

.

Integrated Self-Protection Circuitry, Including:

.

Under Voltage Protection

.

Overtemperature Warning and Error

.

Overload Protection

.

Short-Circuit Protection

.

PWM Activity Detector

.

Standalone Protection Recovery

.

Power-On Reset POR to Eliminate System Power-Supply Sequencing

.

High-Efficiency Power Stage >90% With 80-m Output MOSFETs

.

Thermally Enhanced 44-Pin HTSSOP Package DDV

.

Error Reporting, 3.3-V and 5.0-V Compliant

.

EMI Compliant When Used With Recommended System Design

.

APPLICA ONS

.

Mini/Micro Audio System

.

DVD Receiver

.

Home Theater

PurePath Digital, PowerPad are trademarks of Texas Instruments.

All other trademarks are the property of their respective owners.