JB15LPC-JC

NKK SWITCHES  JB15LPC-JC  轻触开关, 0.05A, 24VDC, 焊接

Series JB illuminated low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.

立创商城:
JB15LPC-JC

得捷:
SWITCH TACTILE SPST-NO 0.05A 24V

e络盟:
轻触开关, 0.05A, 24VDC, 焊接

艾睿:
Apply pressure and turn your circuit on with this low profile JB15LPC-JC tactile switch from NKK Switches. It has a SPST configuration. This device has a maximum current rating of 0.05 A @ 24VDC. This tactile switch has a minimum operating temperature of -25 °C and a maximum of 70 °C. The JB15LPC-JC tactile switch has a PC pin termination style. The maximum DC voltage rating is 24 VDC. This product is 12 mm long, 11.2 mm tall and 12 mm deep. This clear/red flush square button actuator is 0 mm long.

Allied Electronics:
Switch, Tactile; SPST Off On; 50mA 24VDC; PCB pins; Red, Clear/Red

Chip1Stop:
Switch Tactile OFF ON SPST Square Button PC Pins 0.05A 24VDC 5000000Cycles 1.76N Thru-Hole

Verical:
Switch Tactile OFF ON SPST Flush Square Button PC Pins 0.05A 24VDC 5000000Cycles 1.76N Thru-Hole

Newark:
# NKK SWITCHES  JB15LPC-JC  Tactile Switch, Illuminated, 24 V, 50 mA, 1.76 N, Solder

Powell:
LOW PROFILE TACTILE/ILLUMINATED/PC