AD7783

只读，引脚配置的24位ADC，激励电流源 Read-Only, Pin Configured 24-Bit ADC with Excitation Current Sources

Product Details

The is a complete analog front end for low frequency measurement applications. The 24-bit sigma-delta ADC contains one fully differential input channel that can be configured with a gain of 1 or 16 allowing full-scale input signal ranges of ±2.56 V or ±160 mV from a +2.5 V differential reference input. It also contains two 200 mA integrated current sources.

The AD7783 has an extremely simple, read-only digital interface that can be operated in master mode or slave mode. There are no on-chip registers to be programmed. The input signal range and current source selection are configured using two external pins.

The device operates from a 32.768 kHz crystal with an on-chip PLL generating the required internal operating frequency. The output data rate from the part is fixed via the master clock at 19.79 Hz and provides simultaneous 50 Hz and 60 Hz rejection at this update rate. At this update rate, 18-bit p-p resolution can be obtained.

The part operates from a single 3 V or 5 V supply. When operating from 3 V supplies, the power dissipation for the part is 3.9 mW. The AD7783 is available in a 16-lead TSSOP.

Another part in the AD778x family is the AD7782. It is similar to the AD7783 except it has no integrated current sources and two differential input channels.

**Applications**

.

Sensor Measurement

.

Industrial Process Control

.

Temperature Measurement

.

Pressure Measurement

.

Weigh Scales

.

Portable Instrumentation

### Features and Benefits

.

Single-Channel, 24-Bit Σ-Δ ADC

.

Pin Configurable No Programmable Registers

\- ISOURCE SelectTM

\- Pin Programmable Input

Ranges ±2.56 V or ±160 mV

.

Fixed 19.79 Hz Update Rate

.

Simultaneous 50 Hz and 60 Hz Rejection

.

24-Bit No Missing Codes

.

18.5-Bit p-p Resolution ±2.56 V Range

.

16.5-Bit p-p Resolution ±160 mV Range

.

INTERFACE

\-- Master or Slave Mode of Operation

.

Slave Mode

\-- 3-Wire Serial

\-- SPI®, QSPI™, MICROWIRE™, and DSP-Compatible

\-- Schmitt Trigger on SCLK

.

POWER

\-- Specified for Single 3 V

and 5 V Operation

.

\-- Normal: 1.3 mA @ 3 V

.

\-- Power-Down: 9 µA

.

ON-CHIP FUNCTIONS

\-- Rail-to-Rail Input Buffer and PGA