AAT3698IWO-4.2-1-T1

Programmable up to 1.6A w/ Recharge Sequencing USB Port/AC Adapter Li-Ion Battery Charger w/ OVP and LDO TDFN33-14

The AAT3698-1/-2 BatteryManager™ is a single-cell Li-Ion/Li-Polymer battery charger IC designed to operate from a USB port or AC adapter with an input voltage of up to 7.0V. For increased safety, the AAT3698-1/-2 also includes over-voltage input protection OVP up to 28V. The AAT3698-1/-2 precisely regulates battery voltage for 4.2V Li-Ion/Polymer battery cells through a low R DSON switch. The charging current can be set by an external resistor up to 1.6A. If an over-voltage condition occurs from the input, the series switch quickly opens and a fault flag is activated, preventing damage to the battery and the charging circuitry. Other fault conditions are monitored in real time. In case of a battery over-voltage, or over-temperature failure, the device will automatically shut down, thus protecting the charging device and battery under charge. A status monitoring output pin STAT is provided to indicate charging activity. This open drain output pin can be used to drive an external LED as a charging indicator. The AAT3698-1/-2 also includes a 5.0V LDO linear regulator with over-voltage protection that can supply loads of up to 50mA. The AAT3698-1/-2 is available in the Pb-free, thermally enhanced, space-saving 3x3mm TDFN33-14 package and is rated over the -40°C to +85°C temperature range.