AD7879

低电压控制器的触摸屏 Low Voltage Controller for Touch Screens

Product Details

The /AD7889 are 12-bit successive approximation analog-to-digital converters SAR ADCs with a synchronous serial interface and low on-resistance switches for driving 4-wire resistive touch screens. The AD7879/AD7889 work with a very low power supply—a single 1.6 V to 3.6 V supply—and feature a throughput rate of 105 kSPS. The devices include a shutdown mode that reduces current consumption to less than 6 μA.

To reduce the effects of noise from LCDs and other sources, the AD7879/AD7889 contain a preprocessing block. The preprocessing function consists of a median filter and an averaging filter. The combination of these two filters provides a more robust solution, discarding the spurious noise in the signal and keeping only the data of interest. The size of both filters is programmable. Other user-programmable conversion controls include variable acquisition time and first conversion delay; up to 16 averages can be taken per conversion. The AD7879/AD7889 can run in slave mode or standalone master mode, using an automatic conversion sequencer and timer.

The AD7879/AD7889 have a programmable pin that can operate as an auxiliary input to the ADCs, as a battery monitor, or as a general-purpose input/output GPIO. In addition, a programmable interrupt output can operate in three modes: as a general-purpose interrupt to signal when new data is available DAV, as an interrupt to indicate when limits are exceeded INT, or as a pen-down interrupt when the screen is touched PENIRQ. The AD7879/AD7889 offer temperature measurement and touch pressure measurement.

The AD7879 is available in a 12-ball, 1.6 mm × 2 mm WLCSP and in a 16-lead, 4 mm × 4 mm LFCSP. The AD7889 is available in a backside coated version of the WLCSP. Both devices support an SPI interface AD7879/AD7889 or an I2C interface AD7879-1/ AD7889-1.

**Applications**

.

Personal digital assistants

.

Smart handheld devices

.

Touch screen monitors

.

Point-of-sale terminals

.

Medical devices

.

Cell phones

### Features and Benefits

.

4-wire touch screen interface

.

1.6 V to 3.6 V operation

.

Median and averaging filter to reduce noise

.

Automatic conversion sequencer and timer

.

User-programmable conversion parameters

.

Auxiliary analog input/battery monitor 0.5 V to 5 V

.

1 optional GPIO

.

Interrupt outputs INT, PENIRQ

.

Touch-pressure measurement

.

Wake-up on touch function

.

Shutdown mode: 6 μA maximum

.

12-ball, 1.6 mm × 2 mm WLCSP

.

16-lead, 4 mm × 4 mm LFCSP