TPS2148

用于 USB 外设的 3.3V LDO + 双路开关，工作态低电平启用

The incorporates two power distribution switches and an LDO in one small package, providing a USB peripheral power management solution that saves up to 60% in board space over typical implementations.

The TPS2148 meets USB 2.0 bus-powered peripheral requirements. An integrated LDO regulates the 5-V bus power down to 3.3 V for the USB controller, and a MOSFET switch that is internally connected to the output of the LDO simplifies meeting the suspend and enumeration current requirements imposed by the USB specification.

A second switch is available to support a downstream port, stage power to a second voltage regulator, or disable power to selected circuitry in power-save modes.

Each power-distribution switch is capable of supplying 200 mA of continuous current, and the independent logic enables are compatible with 5-V logic and 3-V logic. The switches and the LDO are designed with controlled rise times and fall times to minimize current surges.

The TPS2148 has active-low enables while the TPS2158 has active-high enables.

.

Complete Power Management Solution for USB Bus-Powered Peripherals

.

3.3-V 200 mA Low-Dropout Voltage Regulator With Enable

.

3.3-V 340-m Typ High-Side MOSFET

.

5-V 340-m Typ High-Side MOSFET

.

Independent Thermal- and Short-Circuit Protection for LDO and Each Switch

.

2.9-V to 5.5-V Operating Range

.

CMOS- and TTL-Compatible Enable Inputs

.

75-uA Typ Supply Current

.

Available in 8-Pin MSOP PowerPAD™

.

-40°C to 85°C Ambient Temperature Range

.

APPLICA ONS

.

USB Peripherals

.

Digital Cameras

.

Zip Drives

.

Speakers and Headsets

PowerPAD is a trademark of Texas Instruments.