AM29LV160BB-90EI

NOR Flash Parallel 3.3V 16M-bit 2M x 8/1M x 16 90ns 48Pin TSOP

GENERAL DESCRIPTION

The Am29LV160B is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes or 1,048,576 words. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages. The word-wide data x16 appears on DQ15–DQ0; the byte-wide x8 data appears on DQ7–DQ0. This device is designed to be programmed in-system with the standard system 3.0 volt VCCsupply. A 12.0 V VPPor 5.0 VCCare not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

DISTINCTIVE CHARACTERISTICS

■Single power supply operation

— Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications

— Regulated voltage range: 3.0 to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors

■Manufactured on 0.35 µm process technology

■Supports Common Flash Memory InterfaceCFI

■High performance

— Full voltage range: access times as fast as 90 ns

— Regulated voltage range: access times as fast as 80 ns

■Ultra low power consumption typical values at 5 MHz

— 200 nA Automatic Sleep mode current

— 200 nA standby mode current

— 9 mA read current

— 20 mA program/erase current

■Flexible sector architecture

— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors byte mode

— One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Kword sectors word mode

— Supports full chip erase

— Sector Protection features:

A hardware method of locking a sector to prevent any program or erase operations within that sector

Sectors can be locked in-system or via programming equipment

Temporary Sector Unprotect feature allows code changes in previously locked sectors

■Unlock Bypass Program Command

— Reduces overall programming time when issuing multiple program command sequences

■Top or bottom boot block configurations available

■Embedded Algorithms

— Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors

— Embedded Program algorithm automatically writes and verifies data at specified addresses

■Minimum 1,000,000 write cycle guarantee per sector

■Package option

— 48-ball FBGA

— 48-pin TSOP

— 44-pin SO

■CFI Common Flash Interface compliant

— Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices

■Compatibility with JEDEC standards

— Pinout and software compatible with single power supply Flash

— Superior inadvertent write protection

■Data# Polling and toggle bits

— Provides a software method of detecting program or erase operation completion

■Ready/Busy# pin RY/BY#

— Provides a hardware method of detecting program or erase cycle completion not

available on 44-pin SO

■Erase Suspend/Erase Resume

— Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation

■Hardware reset pin RESET#

— Hardware method to reset the device to reading array data