DAC7513N/250G4

TEXAS INSTRUMENTS  DAC7513N/250G4  数模转换器, 12 bit, 95 kSPS, 串行, 2.7V 至 5.5V, SOT-23, 8 引脚

The is a low-power single 12-bit buffered voltage output Digital-to-Analog Connector DAC with on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7513 uses a versatile 3-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, MICROWIRE™ and DSP interfaces. The DAC7513 requires an external reference voltage to set the output range of the DAC this allows the DAC7513 to be used in a multiplying mode. The DAC7513 incorporates a power-on reset circuit which ensures that the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC7513 contains a power-down feature, accessed over the serial interface that reduces the current consumption of the device to 200nA at 5V. The low-power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment.

.

Power-on reset to 0

.

Ensured monotonic by design

.

Settling time - 10µs to 1LSB

.

Low-power serial interface with Schmitt-triggered inputs

.

On-chip output buffer amplifier, rail-to-rail operation

.

SYNC\interrupt facility

.

Green product and no Sb/Br