AMW106-A02

ZENTRI AMW106-A02 WiFi Shield with AMW006 Numbat Module, 2.4GHz IEEE 802.11B/g/n Wi-Fi Transceiver, USB-UART

The AMW006-A02 is a Mantis Wi-Fi shield with onboard ACKme AMW006 "Numbat" module. It is designed to connect directly to Arduino compatible microcontroller development platform. The core of the AMW006 Numbat module runs at 84MHz and provides up to 1MB flash for data storage ensuring it is flexible enough to run virtually all command/control or sensor applications. The WiConnect application running on the Numbat module provides easy to use ASCII commands to read the state of the buttons and turn the LEDs on and off. The Mantis Wi-Fi shield is compatible with Arduino or STM32 Nucleo platform. The board is designed to work with ACKme"s WiConnect API and via ARM"s mbed environment. Mantis supports all of the features of Numbat including antenna diversity and many others.

.

Plugs directly into +3.3V tolerant Arduino compatible platforms

.

USB-UART interface for a direct serial connection to the AMW006 Wi-Fi module

.

Dual wire whip antennas to support antenna diversity

.

Separate LEDs to indicate data on UART transmit/receive

.

Sensor interface including two buttons and two LEDs

.

System indicator LEDs for network connection state indication

.

Manual reset switch for the Arduino platform

.

Breakout headers and ground hooks for easy prototyping

.

Powered by +3.3V from the Arduino platform