Photocoupler GaAs Ired & Photo-Thyristor
Office Machine Switching Power Supply
The TOSHIBA consists of a photo−thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP. All parameters are tested to the specification of TLP747G. both condition and limits
• Peak off−state voltage: 400V min.
• Trigger LED current: 15mA max.
• On−state current: 150mA max.
• UL recognized: UL1577, file no. E67349
• BSI approved: BS EN60065: 2002
Certificate no. 7364
BS EN60950-1: 2002
Certificate no. 7365
• SEMCO approved:EN60065,EN60950-1,EN60335-1 Certificate no.302586
• Isolation voltage: 4000Vrms min.
• Option D4 type
VDE approved: DIN EN 60747-5-2,
Certificate no.40009373
Maximum operating insulation voltage: 890, 1130VPK
Highest permissible over voltage: 6000, 8000VPK
Note When an EN 60747-5-2 approved type is needed,
please designate the “ Option D4 ”
• Creepage distance: 8.0mm min.
Clearance: 8.0mm min.
Internal creepage path: 4.0mm min.
Insulation thickness: 0.5mm min.
• Conforming safety standards:
DIN 57 804. VDE0804 / 1.83
DIN IEC65 / VDE0860 / 8.81
DIN IEC380 / VDE0806 / 8.81
DIN IEC435 / VDE0805 / draft nov. 84
DIN IEC601T1 / VDE0750T1 / 5.82
BS7002: 1989 EN60950