A3931KJP-T

A3931KJP-T概述

ALLEGRO MICROSYSTEMS  A3931KJP-T  芯片, 无刷直流电机BLDC驱动器, 三相

The is a 3-phase pre-positioning brushless DC BLDC motor Controller for use with N-channel external power MOSFETs. A key automotive requirement is functionality over a wide input supply range. Unique charge pump regulator provides adequate gate drive for battery voltages down to 7V and allows the device to operate with a reduced gate drive at battery voltages down to 5.5V. Power dissipation in the charge pump is minimized by switching from a voltage doubling mode at low supply voltage to a dropout mode at the nominal running voltage of 14V. A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows for DC operation. Internal fixed-frequency PWM current control circuitry can be used to regulate the maximum load current. The peak load current limit is set by the selection of an input reference voltage and external sensing resistor.

.
Synchronous rectification
.
Cross-conduction protection
.
Charge pump and top-OFF charge pump for 100% PWM
.
Integrated commutation decoder logic
.
Extensive diagnostics output
.
Provides 5V hall sensor power
.
Low-current sleep mode
.
Indicates logic fault
A3931KJP-T数据文档
型号 品牌 下载
A3931KJP-T

Allegro MicroSystems 急速微电子

下载
A3932SLDTR-T

Allegro MicroSystems 急速微电子

下载
A3930KJPTR-T

Allegro MicroSystems 急速微电子

下载
A3935KLQTR

Allegro MicroSystems 急速微电子

下载
A3931KJPTR-T

Allegro MicroSystems 急速微电子

下载
A3935KLQTR-T

Allegro MicroSystems 急速微电子

下载
A3932SEQ-T

Allegro MicroSystems 急速微电子

下载
A3936SED

Allegro MicroSystems 急速微电子

下载
A3935KED

Allegro MicroSystems 急速微电子

下载
A3935KED-T

Allegro MicroSystems 急速微电子

下载
A3935KEDTR

Allegro MicroSystems 急速微电子

下载

锐单商城 - 一站式电子元器件采购平台