MK20DN512ZVLL10

NXP  MK20DN512ZVLL10  微控制器, 32位, K2 USB系列, ARM 皮质-M4, 100 MHz, 512 KB, 128 KB, 100 引脚, LQFP

The is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 100MHz. The device incorporates 512kB internal flash, 128kB internal RAM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 66 general-purpose I/O pins. This device also features communication interfaces like five UART modules, three SPI modules, two I2C modules and one I2S module.

.

ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

.

Serial programming interface EzPort

.

FlexBus external bus interface

.

3 to 32MHz Crystal oscillator, 32kHz crystal oscillator and multi-purpose clock generator

.

Multiple low-power modes to provide power optimization based on application requirements

.

Memory protection unit with multi-master protection

.

16-channel DMA controller, supporting up to 63 request sources

.

External watchdog monitor

.

Software watchdog

.

Low-leakage wakeup unit

.

Hardware CRC module to support fast cyclic redundancy checks

.

128-bit Unique identification ID number per chip

.

Low-power hardware touch sensor interface TSI

.

Programmable gain amplifier PGA integrated into each ADC

.

Three analog comparators CMP containing a 6-bit DAC and programmable reference input

.

Voltage reference

.

Programmable delay block

.

8-channel Motor control/general purpose/PWM timer

.

Two 2-channel quadrature decoder/general purpose timers

.

Periodic interrupt timers and 16-bit Low-power timer