ADUM3472ARSZ-RL7

Digital Isolator Logic 4CH 1Mbps 20Pin SSOP T/R

Product Details

The ADuM3470/ADuM3471/ADuM3472/ADuM3473/ADuM3474 devices are quad-channel, digital isolators with an integrated PWM controller and transformer driver for an isolated DC/DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC/DC converter provides up to 2 W of regulated, isolated power at 3.3 V to 24 V from a 5.0 V input supply or from a 3.3 V supply. This eliminates the need for a separate, isolated DC/DC converter in 2 W isolated designs. The iCoupler chip-scale transformer technology is used to isolate the logic signals, and the integrated transformer driver with isolated secondary side control provides higher efficiency for the isolated DC/DC converter. The result is a small form factor, total isolation solution.

The ADuM347x isolators provide four independent isolation channels in a variety of channel configurations and data rates.

**Applications**

.

RS-232/RS-422/RS-485 transceivers

.

Industrial field bus isolation

.

Power supply startup bias and gate drives

.

Isolated sensor interfaces

.

Process controls

### Features and Benefits

.

Isolated PWM Controller

.

Integrated transformer driver

.

Regulated adjustable output:

3.3 V to 24 V

.

2 W output power

.

70% efficiency at guaranteed load of 400 mA at 5.0 V output

.

Quad dc-to-25 Mbps NRZ signal isolation channels

.

20-lead SSOP package

.

High temperature operation: 105°C

.

High common-mode transient immunity: >25 kV/μs

.

200 kHz to 1 MHz adjustable oscillator frequency

.

Soft start function at power-up

.

Pulse-by-pulse overcurrent protection

.

Thermal shutdown

.

2500 V rms isolation

.

Evaluation Board available

.

Automotive Qualified