MC9S08FL8CBM

NXP  MC9S08FL8CBM  微控制器, 8位, S08FL, 20 MHz, 8 KB, 768 Byte, 32 引脚, DIP

Overview

The 8-bit MC9S08FL16/8 FL16/8 MCU family is a cost-effective solution ideal for cost-sensitive home appliance applications that require input/output I/O flexibility. It features up to 16 KB flash read/program/erase over full operating voltage and temperature, two low-power stop modes and reduced power wait mode and security circuitry to prevent unauthorized access to RAM and flash contents.

MoreLess

## Features

### 8-bit HCS08 Central Processing Unit CPU

* Up to 10 MHz internal bus 20 MHz HCS08 core frequency with 4.5V to 5.5V operation across temperature range of -40°C to +85°C

### On-Chip Memory

* Up to 16K flash read/program/erase across entire operating voltage and temperature ranges

* Up to 1024 bytes random access memory RAM

* Security circuitry

### Power-Saving Modes

* Two low-power stop modes, reduced-power wait mode

### Clock Source Options

* Oscillator XOSC clock source options include oscillator, crystal or ceramic resonator

* Up to 20 MHz internal clock source ICS module

### Peripherals

* Interrupt priority controller IPC

* Analog-to-digital converter ADC—12-channel, 8-bit resolution

* Timer/pulse-width modulator module TPM— 1 x 4-channel and 1 x 2-channel

* SCI module with optional 13-bit break, LIN extensions

### Input/Output

* 30 general purpose input/output GPIO pins including one input-only pin and one outputonly pin

### System Protection

* Watchdog computer operating properly COP module can be reset with option to run from dedicated 1 kHz internal clock source or bus clock

* Low-voltage detection with reset or interrupt, selectable trip points

* Illegal opcode detection with reset

* Illegal address detection with reset

* Flash block protection

### Development Support

* Single-wire background debug interface

* Breakpoint setting capability

* On-chip in-circuit emulator ICE debug module containing two comparators and nine trigger points