LPC1850 Microcontroller Starter Kit 12MHz/180MHz CPU 16.195Mb RAM 16KB/4Mb/16Mb I2C EEPROM/NOR Flash/SPI Flash
is a Keil MCB1800 evaluation board with ULINK-ME debug adapter. Board enables to create and test working programs based on the NXP LPC1850 ARM Cortex-M3 processor based device. The NXP LPC1850 microcontroller provided with the MCB1800 board is a high end LPC devices with on chip CAN, Ethernet, USB full and high-speed connectivity. A 12MHz oscillator provides the clock signal for the MCU. The JTAG/Cortex debug Interface connector provides debugging and emulator support for the LPC1850 device. The JTAG/Cortex debug Interface allows application debugging and programming of on chip and off chip flash devices. And also supports the Serial Wire Mode of Cortex-M3 based devices. The MCB1800 board connects the on chip serial UARTs to the ST3232C, which converts the logic signals to RS232 voltage levels. ULINK-ME debug adapter connects PC"s USB port to target system and allows to program and debug embedded programs on target hardware.