STM32F207IGH6J

STMICROELECTRONICS  STM32F207IGH6J  芯片, 微控制器, 32位, CORTEX-M3, 120MHZ, UFBGA-176

The is a STM32 F2 series 32-bit Microcontroller based on the high performance ARM Cortex-M3 RISC core operating at a frequency of up to 120MHz. The device incorporates high-speed embedded memories Flash memory up to 1-Mbyte, up to 128kB of system SRAM, up to 4kB of backup SRAM and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. The devices also feature an adaptive real-time memory accelerator ART Accelerator™ which allows to achieve a performance equivalent to 0 wait state program execution from flash memory at a CPU frequency up to 120MHz. This performance has been validated using the CoreMark benchmark. The device offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true number random generator RNG.

.

150 DMIPS/1.25 DMIPS/MHz Dhrystone 2.1

.

LCD parallel interface, 8080/6800 modes

.

4 to 26MHz Crystal oscillator

.

16MHz Internal factory-trimmed RC

.

32kHz Oscillator for RTC with calibration

.

32kHz Internal RC with calibration

.

Sleep, stop and standby modes

.

VBAT supply for RTC, 20 x 32-bit backup registers and optional 4kB backup SRAM

.

Debug mode - Serial wire debug SWD, JTAG and Cortex-M3 embedded trace macrocell™

.

2 x CAN interfaces 2.0B Active

.

SDIO interface

.

USB 2.0 full speed device/host/OTG controller with on-chip PHY

.

USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip PHY and ULPI

.

10/100 Ethernet MAC with dedicated DMA - supports IEEE 1588v2 hardware, MII/RMII

.

8 to 14-bit Parallel camera interface 48MB maximum

.

96-bit Unique ID