ATSAMW25H18-MR510PB

ATMEL  ATSAMW25H18-MR510PB  评估电路板, ATWINC1500, IEEE802.11B/G/N

The is a SmartConnect Wi-Fi Module supported by the Atmel studio integrated development platform. The kit provides easy access to the features of the Atmel ATSAMW25H18-MR510PB and explains how to integrate the device in a custom design. The Xplained Pro series evaluation kits include an onboard Embedded Debugger and no external tools are necessary to program or debug the ATSAMW25H18-MR510PB. The Xplained Pro extension kits offer additional peripherals to extend the features of the board and ease the development of custom designs. The Xplained Pro is an evaluation platform that provides the complete Atmel microcontroller/SoC RF experience. The platform consists of a series of microcontroller MCU, wireless and extension boards that are integrated with Atmel studio, have Atmel software framework ASF drivers and demo code, support data streaming and more.

.

Onboard printed antenna

.

ATECC108 Crypto chip

.

Integrated 26MHz crystal

.

Embedded debugger EDBG

.

USB interface, device and reduced host mode

.

Programming and debugging on board SAM W25 through serial wire debug SWD

.

Virtual COM-port interface to target via UART

.

Atmel data gateway interface DGI to target via SPI and TWI

.

Four GPIOs connected to target for code instrumentation

.

One yellow status LED and one green board power LED

.

Digital I/O

.

Two mechanical buttons user and reset button

.

One user LED

.

One extension header

.

Three possible power sources